Define：
1.Use the special DST (Direct Synchronization Torque) motor, instead of the previous complicated V-belt drive system,to drive the flat cam directly, to achieve the obvious improvements like: High efficiency,Energy saving, Low consumption & Low fault.
2.Shuttle unit: adopt idler wheel form shuttle, non-lubrication, low pollution.
3.High precision automatic warp tension control system, it offers good condition for better quality fabric.
4.Electrical control system: adopt the European famous-brand program processor to control the loom, strong function, concentrated control, easy operation.
5.Apply to produce flexible intermediate bulk container(FIBC'S), flat container fabric (U-panel FIBC), tarpaulin, geo-textiles and some other woven fabric.
 Products PIC :
Technical data :
| Item/Type | SBYZ-3600X14 |
| Number of shuttles | 14 |
| Revolutions(Max.) | 50rpm |
| Weft insertion | 700ppm |
| Working width/double flat | 3000～3600mm |
| Working width/double flat（At reduced pick rate） | 3500～3600/3000～3200mm |
| Number of warp tape | 3528 |
| Inside diameter and length of core | φ30～38X230mm |
| Max. diameter of weft yarn bobbin | φ115mm |
| Main motor power | 12.5Kw |
| Warp infeed motor rating | 0.4 Kw×4 |
| Haul off motor rating | 2.2 Kw |
| Winder torque motor rating | 7Nm |
| Max. roll diameter | φ1100mm |
| Dimensions (A×D×B) | 19800×5400×5500mm |
| Weight | 10.8t |
Because of the continuous design improvement, some specification change may not be prior notice